Magnetometers

SENSYS MagDrone R3 (Utilising UgCS SkyHub & TTF System)

SENSYS MagDrone R3 is a Fluxgate UAV magnetometer system and therefore is able to detect any magnetic metals/materials. It is applicable to:

• Searching for UXO (unexploded ordnance)
• Locating buried infrastructure (metal pipes and shielded cables)
• Archaeology
• Surveying for any metal objects weighing a few hundred grams or heavier lying underground.

The R3 uses 2 sensors spaced 1 metre apart and provides a compact and stable solution for UAV drones including the M300RTK.

SENSYS MagDrone R4 (Utilising UgCS SkyHub & TTF System)

SENSYS MagDrone R4 is a Fluxgate UAV magnetometer system and therefore is able to detect any magnetic metals/materials. It is applicable to:

• Searching for UXO (unexploded ordnance)
• Locating buried infrastructure (metal pipes and shielded cables)
• Archaeology
• Surveying for any metal objects weighing a few hundred grams or heavier lying underground.

MagDrone R4, the SENSYS R3’s bigger brother, is great for high resolution mapping, which is essential for detecting small and compact objects and structures in the ground. With 5  sensors, smaller targets can be identified when flying the drone at low altitudes of 1-2 metres.

UgCS MagNIMBUS Magnetometer System

UAV Magnetometer system powered by QuSpin Gen-2 sensors

A UAV vertical gradiometer system consisting of a self-foldable sensor mount enabling easy take off and landing.

Specifically built for the M300RTK working on confirming steel utility pipes and electrical cables. The system is designed so the sensor can be flown nominally at 20-50cm above the ground meaning smaller pipes and cables can be identified.

• Fly sensor low to ground with anti-snag design
• Fly without the need for a magnetic base station
• Simple to set up and go flying
• Locate items weighing hundreds of grams

MagArrow II Magnetometer System

UAV Sensors: Ultra-sensitive hi-end lightweight MagArrow magnetometer for UAV

The system consists of the MagArrow magnetometer mounted on a drone. Survey missions are planned and flown in automatic mode with UgCS. The adding of the onboard computer UgCS SkyHub enables the drone mounted magnetometerto fly in True Terrain Following (TTF) mode with the help of the radar altimeter and logs precise flight track to refine MagArrow’s data.

• Reach Inaccessible Terrain
• Super-Fast Sampling Rate (up to 10 m/s with samples every 1 cm)
• Low Battery Consumption
• Lightweight